QPellet

The fire bowls are made of 100% high purity quartz glass. Quartz glass is mainly made from natural sand. The special purity (99.998% silicon dioxide) is found only in a few places on earth. At very high temperatures and through hot chemical processes and under clean room conditions, this valuable natural raw material is prepared for our fire bowls.

Manufacturing process:
In the manufacture of our fire bowls, natural crystalline sand is melted in quartz glass at extremely high temperatures (> 3,000 ° C).
Under protective gas, the sand is melted layer by layer in a graphite crucible with a short electric arc.
In this process, even the smallest chemical abnormalities soften and become very small (<2mm) spots in our fire bowls. These do not affect the temperature resistance and the strength of the glass, rather they show the natural origin of this product.

Processing process:
Our fire bowls are made especially environmentally friendly. This is achieved through the self-insulating function of the quartz sand. While the sand is being melted in the mold, the outer layer provides permanent insulation. This saves a considerable amount of energy. This effect also ensures the beautiful marbling on the outer wall of our fire bowls.
Following the melting process, the edge is cut straight and provided with a protective phase. After a final quality control, the fire bowls are packed break-proof and then make their way to you.

Fire bowls from qflame offer you security. A chamfer on the edge of the fire bowl means that there are no cuts to be feared. We recommend to wear cut protection gloves due to the weight and in the unlikely event of a break.

You get a beautiful fire polished surface on the inside of your bowl. This enables easy cleaning even with stubborn dirt. The special properties of quartz glass also allow the use of the harshest cleaning agents.
Please note that quartz glass can be compared to normal glass in terms of breaking strength. Wooden sheaths should therefore always be carefully placed in the bowl and the bowl should be protected from flying objects.
Fluctuations in temperature do not matter to your fire bowl. You can also operate it in winter without any influence.

Please do not throw pieces of wood or other objects into the tray. Place combustion material in it carefully. And please also make sure to handle carefully, especially children.

The QFlame glass fire bowl is available in three different sizes:

•  50 cm in diameter x 36.5 in height cm
• 56 cm in diameter x 38.5 in height cm
• 64 cm in diameter x 45.5 in height cm
• 71 cm in diameter x 49.5 in height cm

Simply write to us using the contact form above. A sales partner near you will then get in touch with you.

Almost all types of wood are suitable for use, for example: beech, oak, ash, birch or other types of wood from deciduous trees that has been adequately dried. If possible, do not use wood containing resin (e.g. spruce) in the Qflame glass fire bowl. This type of wood emits more sparks when burnt and the resin may cause baked residue.
Please avoid
o wood that has been pressure-treated or euro pallets. The wood surface must not have been treated.
o Wood waste containing paint, glue or varnish
o Domestic waste (milk cartons, egg cartons, plastic, paper, e.g. newspapers or advertising leaflets)
o Building site waste containing screws or nails as well as residue from chipboards or plasterboard

Due to the smooth inner surface, the glass fire bowl can be easily cleaned of soot and dirt with water. Fireplace cleaner can be taken supportively with it.